Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | None |
Manual Transmission
TYPICAL ENABLING CONDITIONS
| Engine coolant temperature | 70°C (158°F) or more |
| Engine speed | 1500 to 4000 rpm |
| Fuel cut at high engine speed | Not executing |
| Engine load | 31% or more |
| ECT sensor circuit fail (P0115, P0117, P0118) | Not detected |
| MAF sensor circuit fail (P0101, P0102, P0103) | Not detected |
Automatic Transmission
TYPICAL ENABLING CONDITIONS
| Time after following conditions met: | 3 seconds or more |
| Ignition switch | ON |
| Park/neutral position switch | OFF |
| Vehicle speed | 5.59 mph (9 km/h) or more |
| Time after ignition switch off to ON | More than 0.5 seconds |
| Transfer neutral switch (only for 4WD) | Not N position |