Inspection Procedure

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CONDITION
1. Check with the customer if the vehicle has been turned by a turntable.
  OK: Vehicle has not been turned by turntable.
  
  HINT:
  
  If the vehicle is turned on a turntable with the ignition switch ON, the system may store the angular velocity. As a result, the vehicle position cursor may deviate.
NG: TURN IGNITION SWITCH TO ON WHEN VEHICLE IS COMPLETELY STOPPED

Fig 1: Checking Vehicle Turned With Turntable
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )