Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> Sienna LE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Navigation / Multi-Info Display) >> Navigation System >> Current Position Display does not Appear >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK NAVIGATION RECEIVER ASSEMBLY 
    1. Check if a map disc is inserted into the map disc slot.

      OK: A map disc is inserted. 

    NG: INSERT MAP DISC IN MAP SIDE SLOT 

    OK: Go to next step 

  2. CHECK MAP DISC 
    1. Check that the map disc is not deformed or cracked.

      OK: No deformations or cracks on the map disc. 

    NG: REPLACE MAP DISC 

    Fig 1: Precaution For Disc Deformed And Cracked
    G04945341Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE )