DTC C1442/44 Invalid Data Received from Deceleration Sensor; C1443/34 Invalid Data Received from Yaw Rate Sensor: Procedure
- Clear the DTCs.
- Start and idle the engine for 60 seconds, and then stop the engine.
- Check if the same DTC is output.
Result
| Result | Proceed to |
|---|---|
| DTCs (C1442/44 and/or C1443/34) are output | A |
| DTCs (C1442/44 and C1443/34) are not output | B |
B: CHECK FOR INTERMITTENT PROBLEMS
A: REPLACE YAW RATE AND DECELERATION SENSOR