Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Starting System (2GR-FE)) >> Engine Switch >> Installation

Engine Switch: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL ENGINE SWITCH 
    1. Attach the 2 claws to install the switch.
      Fig 1: Identifying Switch And Claws
      G05999272Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the switch connector.
  2. INSTALL AIR CONDITIONING CONTROL ASSEMBLY 
    1. Install the air conditioning control (See AIR CONDITIONING PANEL (FOR MANUAL AIR CONDITIONING SYSTEM) ).
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Fig 2: Locating Switch Connector
    G05999268Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals