Inspection Procedure

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

CHECK COMBINATION METER ASSEMBLY (HEIGHT CONTROL OFF INDICATOR LIGHT)

Check the light.

Result

RESULT REFERENCE

Result	Proceed to
Height control OFF indicator light does not light up	A
Height control OFF indicator light flashes	B

B: Go to step 4

A: GO TO NEXT STEP

CHECK WIRE HARNESS (COMBINATION METER ASSEMBLY (HEIGHT CONTROL OFF INDICATOR LIGHT) - SUSPENSION CONTROL ECU)
NG: REPAIR OR REPLACE HARNESS AND CONNECTOR

OK: GO TO NEXT STEP
RECHECK COMBINATION METER ASSEMBLY (HEIGHT CONTROL OFF INDICATOR LIGHT)
See combination meter troubleshooting (see ON-VEHICLE INSPECTION ).

NG: REPLACE BULB OR, REPAIR OR REPLACE COMBINATION METER ASSEMBLY

OK: REPLACE SUSPENSION CONTROL ECU
CHECK CONNECTION OF CONNECTOR
NG: CONNECT CONNECTOR

OK: GO TO NEXT STEP
CHECK WIRE HARNESS (COMBINATION METER ASSEMBLY (HEIGHT CONTROL OFF INDICATOR LIGHT) - SUSPENSION CONTROL ECU)
NG: REPAIR OR REPLACE HARNESS AND CONNECTOR

OK: REPLACE SUSPENSION CONTROL ECU