Inspection Procedure
NOTE:
- This code may be output even when a malfunction does not exist.
- When this code is output frequently, replace the radio receiver.
HINT:
After the inspection is completed, clear the DTCs.
- CLEAR DTC
- Clear the DTC (See DTC CHECK / CLEAR ).
HINT:
These DTCs do not indicate a malfunction.
- RECHECK DTC
- Recheck the DTC and check if the same trouble code occurs again.
OK:
Malfunction disappears.
NG: REPLACE RADIO RECEIVER ASSEMBLY
OK: END
- Recheck the DTC and check if the same trouble code occurs again.