Inspection Procedure

1. Using the Techstream, perform the Active Test.

   Combination Meter 

   ACTIVE TEST - COMBINATION METER
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Indicat. Lamp Cruise	CRUISE main indicator light operation	OFF or ON	-

   OK: Indicator light comes on/goes off. 

NG: REPLACE COMBINATION METER ASSEMBLY  (See REMOVAL )

OK: Go to Next Step 

1. Using the Techstream, read the Data List.

   Cruise Control 

   DATA LIST - CRUISE CONTROL
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   CCS Indicator M-CPU	CRUISE main indicator light (Main CPU) / ON or OFF	ON: CRUISE main indicator light is on OFF: CRUISE main indicator light is off	-

   OK: The Techstream display changes according to condition of CRUISE main indicator light. 

NG: REPLACE ECM  (See REMOVAL )

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE  )