Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> Highlander Base, 3.5 S, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Except Hybrid) >> Cruise Control System >> DTC Check/Clear

DTC Check/Clear

  1. DTC CHECK 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Turn the Techstream main switch on.
    4. Select the following menu items: Powertrain/Cruise Control/Trouble Codes.
    5. Check the details of the DTC(s) (See DIAGNOSTIC TROUBLE CODE CHART ).
  2. DTC CLEAR 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Turn the Techstream main switch on.
    4. Select the following menu items: Powertrain/Cruise Control/Trouble Codes.
    5. Erase the DTCs.
scientia non olet · About Mike's Workshop Manuals