Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> Highlander Base, 2.7 A >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Starting System (2GR-FE)) >> Smart Key System >> DTC Check/Clear

DTC Check/Clear

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Read the DTC by following the prompts on the tester screen.

    HINT:

    Refer to Techstream operator's manual for further details.

  2. CLEAR DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Erase the DTC by following the directions on the tester screen.

    HINT:

    Refer to Techstream operator's manual for further details.

scientia non olet · About Mike's Workshop Manuals