Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> Highlander Base, 2.7 A >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS (Except Hybrid) >> Window Defogger System >> Terminals Of Ecu

Terminals Of Ecu

  1. CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY 
    Fig 1: Identifying Air Conditioning Amplifier Assembly Connector
    G05421224Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the voltage and resistance according to the value(s) in the table below.

      Standard voltage 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      D37-38 (RDEF) - D37-14 (GND) W - W-B Rear defogger signal Ignition switch on (IG), Rear window defogger switch OFF 11 to 14 V
      Ignition switch on (IG), Rear window defogger switch ON Below 1 V
      D37-1 (IG+) - D37-14 (GND) GR - W-B Power source (IG) Ignition switch on (IG) 11 to 14 V
      Ignition switch off Below 1 V
      D37-21 (B) - D37-14 (GND) LG - W-B Power source (Back-up) Always 11 to 14 V

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      D37-14 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

      If the result is not as specified, there may be a malfunction in the wire harness or amplifier.

  2. CHECK AIR CONDITIONING CONTROL ASSEMBLY 
    Fig 2: Identifying Air Conditioning Control Assembly Connector
    G05421225Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the voltage and resistance according to the value(s) in the table below.

      Standard voltage 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      E10-2 (IG+) - E10-10 (GND) V - GR Power source (IG) Ignition switch on (IG) 11 to 14 V

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester Connection Wiring Color Terminal Description Condition Specified Condition
      E10-10 (GND) - Body ground GR - Body ground Ground Always Below 1 Ω

      If the result is not as specified, there may be a malfunction in the wire harness.