Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Sensor Registration >> Confirmation Of Transmitter ID Registration

Confirmation Of Transmitter ID Registration

  1. Set the pressure of all tires (including spare tire) to the pressure specified on the tire and loading information label.
  2. Connect a Techstream to the DLC3.
  3. Turn ignition switch ON.
  4. Turn Techstream ON.
  5. Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
  6. Observe the "ID Tire Inflation Pressure" values.
  7. Confirm the ID numbers for all tires (including the spare tire) are displayed on the screen. If all values are displayed correctly, registration was completed successfully.
scientia non olet · About Mike's Workshop Manuals