Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> Camry Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2AZ-FE) (Except Hybrid) >> SFI System >> ECM Power Source Circuit >> Description

ECM Power Source Circuit: Description

When the ignition switch is turned ON position, the battery voltage is applied to IGSW of the ECM. The output signal from the MREL terminal of the ECM causes a current to flow to the coil, closing the contacts of the engine room J/B (EFI relay) and supplying power to either terminal +B or +B2 of the ECM.

scientia non olet · About Mike's Workshop Manuals