Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2008 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Engine Fuel System >> Fuel Sender Gauge Assembly (For Hatchback) >> Installation

Fuel Sender Gauge Assembly (For Hatchback): Installation

  1. INSTALL FUEL SENDER GAUGE ASSEMBLY 
    1. Install the fuel sender gauge onto the fuel suction with pump and gauge tube.
      2. Fig 1: Identifying Fuel Sender Gauge Onto Fuel Suction
      G04833464Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the fuel sender gauge connector.
      3. Fig 2: Identifying Fuel Sender Gauge Connector
      G04504577Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY  (see INSTALLATION )
  3. INSTALL FUEL PUMP GAUGE RETAINER  (see INSTALLATION )
  4. CONNECT FUEL TANK VENT HOSE SUB-ASSEMBLY  (see INSTALLATION )
  5. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY  (see INSTALLATION )
  6. INSTALL REAR FLOOR SERVICE HOLE COVER  (see INSTALLATION )
  7. INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type)  (see INSTALLATION )
  8. INSTALL NO. 2 REAR SEAT LEG COVER (for 60/40 Split Seat Type)  (see INSTALLATION )
  9. INSTALL NO. 1 REAR SEAT LEG COVER (for 60/40 Split Seat Type)  (see INSTALLATION )
  10. INSTALL DECK FLOOR BOX (for 60/40 Split Seat Type)  (see INSTALLATION )
  11. INSTALL DECK BOARD SUB-ASSEMBLY (for 60/40 Split Seat Type)  (see INSTALLATION )
  12. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (for 60/40 Split Seat Type)  (see INSTALLATION )
  13. INSTALL REAR SEAT CUSHION COVER PAD (for Hold Down Seat Type)  (see INSTALLATION )
  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

  15. CHECK FOR FUEL LEAK  (see PRECAUTION )
scientia non olet · About Mike's Workshop Manuals