Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2008 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Cruise Control System >> DTC Check / Clear

DTC Check / Clear

  1. DTC CHECK 
    1. Connect a Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the tester on.
    4. Enter the following menues: Powertrain / Cruise Control / Trouble Code.
    5. Read the DTCs.
  2. DTC CLEAR 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the tester on.
    4. Enter the following menues: Powertrain / Cruise Control / Trouble Code.
    5. Erase the DTCs.
scientia non olet · About Mike's Workshop Manuals