Crankshaft Position Sensor: Installation

INSTALL CRANKSHAFT POSITION SENSOR
1. Install the sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the sensor connector.
  
  Fig 1: Locating Crankshaft Position Sensor And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CRANKSHAFT POSITION SENSOR PROTECTOR
1. Install the sensor protector with the 2 bolts.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 2: Locating Crankshaft Position Sensor Protector Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002