Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2008 >> RAV4 Base, 2.4 D, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 706 (Id Code Box (W/ Smart Key) (Service Information)) >> Id Code Box (W/ Smart Key System) >> Installation >> Installation

Id Code Box (W/ Smart Key System): Installation: Installation

WARNING: This page is about a different car, the 2010 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ID CODE BOX 
    1. Install the ID code box with the bolt.
      Fig 1: Identifying Bolt And Transponder Key ECU
      GTY219713Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Attach the clamp.
    3. Connect the connector.
  2. INSTALL AIR CONDITIONER UNIT ASSEMBLY 
    1. Install the air conditioner unit. Refer to INSTALLATION .
  3. INSTALL LOWER INSTRUMENT PANEL 
    1. Install the lower instrument panel. Refer to INSTALLATION .
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About Mike's Workshop Manuals