Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
Case 1:
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever these DTCs are not present | None |
| Power switch | ON |
| Engine | Running |
| Battery voltage | 8 V or more |
Case 2:
TYPICAL ENABLING CONDITIONS
| Internal engine OFF timer (elapsed time from engine stop) | 10 to 30 minutes |
| Battery voltage | 8 V or more |
| Power switch | ON |
Case 3:
TYPICAL ENABLING CONDITIONS
| Internal engine OFF timer (elapsed time from engine stop) | 40 minutes or more |
| Battery voltage | 8 V or more |
| Power switch | ON |