Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control System (Hybrid)) >> Mass Air Flow Meter >> Installation

Mass Air Flow Meter: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL MASS AIR FLOW METER 
    1. Install the mass air flow meter with the 2 screws.
    2. Connect the mass air flow meter connector.
    3. Connect the 2 wire harness clamps to the air cleaner assembly.
    Fig 1: Identifying Air Cleaner Assembly Wire Harness Clamps
    G05625725Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals