Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS TABLE
| The monitor will run whenever these DTCs are not present | P0115, P0116, P0117, P0118 (ECT Sensor), P0120, P0121, P0122, P0123, P0220, P0222, P0223, P2135 (TP Sensor), P0125 (Insufficient ECT for Closed Loop), P0335 (CKP Sensor), P0340 (CMP Sensor) |
|---|---|
| Throttle position (Throttle position sensor voltage) | 0.24 V or more |
| Engine | Running |
| Battery voltage | 10.5 V or more |
| Engine coolant temperature | 70°C (158°F) or more |
| Intake air temperature sensor current | OK |
| Engine coolant temperature sensor current | OK |
| Crankshaft position sensor current | OK |
| Throttle position sensor current | OK |
| Fuel tank pressure sensor | OK |
| EVAP leak detection pump | OK |
| EVAP vent valve | OK |