Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2008 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (Smart Access System (Keyless Entry) (Diagnostics - Introduction)) >> Smart Access System With Push-Button Start >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Read the DTC by following the prompts on the tester screen.

      HINT: 

      Refer to the Techstream operator's manual for further details.

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Erase the DTC by following the directions on the tester screen.

    HINT: 

    Refer to the Techstream operator's manual for further details.

scientia non olet · About Mike's Workshop Manuals