Inspection Procedure

1. Make sure that the CD is a normal audio CD, and that it is not deformed, flawed, stained, burred or otherwise defective.

   OK: Normal audio CD. 

   HINT:

   Translucent or uniquely-shaped CDs cannot be played.

NG: CD IS FAULTY 

OK: Go to Next Step 

1. Check whether or not the CD was inserted upside down.

   OK: CD was properly inserted. 

NG: INSERT CD PROPERLY 

OK: Go to Next Step 

1. Clean the disc by wiping the CD's data side radially with a soft cloth.

   OK: Malfunction disappears. 

   NOTE: Do not use a conventional record cleaner or antistatic preservative.

OK: CD WAS DIRTY 

Fig 1: Cleaning Disc Surface With Soft Dry Cloth

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG: Go to Next Step 

1. Replace the CD with a normal one and check if the same problem occurs again.

   OK: Malfunction disappears. 

NG: REPLACE RADIO RECEIVER  (See REMOVAL  )

OK: CD IS FAULTY