Inspection Procedure

WARNING: This page is about a different car, the 2007 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

After the inspection is completed, clear the DTCs.

CHECK THAT CD IS INSERTED PROPERLY
1. Check that the CD is not inserted upside down.
  OK: CD is properly inserted.
NG: INSERT CD PROPERLY

OK: Go to next step
CHECK DISC
1. Check that the disc is not deformed or cracked.
  OK: No deformations or cracks on the disc.
NG: CHANGE DISC

Fig 1: Precaution For Map Disc
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK: Go to next step
DISC CLEANING
1. Disc cleaning
  1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to outside in a radial direction.
    NOTE: Do not use conventional record cleaner or antistatic preservative.
    
    Fig 2: Cleaning Disc Surface With Soft Dry Cloth
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CLEAR DTC
1. Clear the DTCs (See DTC CHECK / CLEAR ).
RECHECK DTC
1. Recheck for DTCs and check if the same trouble occurs again.
  OK: Malfunction disappears.
OK: END

NG: Go to next step
REPLACE DISC WITH ANOTHER AND RECHECK
1. Replace the disc with another and recheck.
  1. Replace the disc with another normal one.
  2. Clear the DTCs (See DTC CHECK / CLEAR ).
  3. Recheck for DTCs and check if the same trouble occurs again.
    OK: Malfunction disappears.
NG: REPLACE NAVIGATION RECEIVER ASSEMBLY

OK: END