Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2008 >> Camry Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System (Hybrid)) >> Accelerator Pedal Rod >> Removal

Accelerator Pedal Rod: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE ACCELERATOR PEDAL ROD 
    1. Disconnect the accelerator pedal position sensor connector.
    2. Remove the 2 bolts and accelerator pedal rod.
    Fig 1: Locating Accelerator Pedal Rod Bolts
    G04973412Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals