Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS CHART
| The monitor will run whenever these DTCs are not present | P0100 - P0103 (MAF sensor) P0105 - P0108 (MAP sensor) P0115 - P0118 (ECT sensor) P0120 - P02238 (TP sensor) P0125 (VSS/ECT1 sensor, non-ECT) |
| Time after ignition switch off to on | 3 seconds or more |
| Engine | Running |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |
| Either of following conditions is met | Condition 1 or 2 |
| 1. All of following conditions are met | Condition (a), (b) and (b) |
| (a) ECT | 20°C (68°F) or more |
| (b) ECT fail | Not detected |
| (c) Time after park/neutral position switch on to off | 10 seconds or more |
| 2. All of following conditions are met | - |
| Either (a) or (b) is set | - |
| (a) ECT | Less than 20°C (68°F) |
| (b) ECT fail | Detected |
| (c) Time after park/neutral position switch on to off | 30 seconds or more |