Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Yaris S, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Cruise Control System >> DTC Check / Clear

DTC Check / Clear

  1. DTC CHECK 
    1. Connect the intelligent tester with CAN VIM to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the DTCs by following the prompts on the tester's screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

      Fig 1: Connecting Cable Of Intelligent Tester To CAN VIM
      G04833336Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. DTC CLEAR 
    1. Connect the intelligent tester with CAN VIM to the DLC3.
    2. Turn the ignition switch ON.
    3. Erase the DTCs by following the prompts on the tester's screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

scientia non olet · About Mike's Workshop Manuals