Diagnostic Procedure
WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM SELF-DIAGNOSIS
With CONSULT-II
- Turn ignition switch "ON". (Do not start engine.)
- Select "SELF-DIAG RESULTS" mode for "EPS" with CONSULT-II.
- Touch "ERASE".
- Turn ignition switch "OFF", and wait at least 10 seconds.
- Start engine.
- Perform the self-diagnosis again.
Is the "CONTROL UNIT [C1608]" displayed?
YES >> Replace EPS control unit. Refer to " REMOVAL AND INSTALLATION " .
NO >> INSPECTION END