Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Body Control System) >> BCM (Body Control Module) >> Removal and Installation of BCM >> Removal

Removal and Installation of BCM: Removal

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box. Refer to " GLOVE BOX ASSEMBLY  "  .
  2. Remove the BCM screws, disconnect the connectors and remove the BCM (1).
    Fig 1: Identifying BCM
    G04815663
scientia non olet · About Mike's Workshop Manuals