Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Body, Lock & Security System) >> Remote Keyless Entry System >> Removal and Installation of Remote Keyless Entry Receiver >> Removal

Removal and Installation of Remote Keyless Entry Receiver: Removal

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove glove box assembly. Refer to " REMOVAL AND INSTALLATION  "  .
  2. Disconnect remote keyless entry receiver connector, remove screw and remote keyless entry receiver.
    Fig 1: Identifying Remote Keyless Entry Receiver Screw
    G04814421
scientia non olet · About Mike's Workshop Manuals