Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Body, Lock & Security System) >> Intelligent Key System >> Removal and Installation of Intelligent Key Unit >> Removal

Removal and Installation of Intelligent Key Unit: Removal

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove glove box assembly. Refer to " REMOVAL AND INSTALLATION  "  .
  2. Disconnect Intelligent Key unit connector, remove screw and Intelligent Key unit.
    Fig 1: Identifying Intelligent Key Unit Connector
    G04814561
scientia non olet · About Mike's Workshop Manuals