Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Body, Lock & Security System) >> Intelligent Key System >> Ignition Switch Position Check

Ignition Switch Position Check

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK IGNITION POWER SUPPLY 

    Check voltage between Intelligent Key unit connector and ground.

    CONNECTOR TERMINAL VOLTAGE SPECIFICATIONS

    Terminals Ignition switch position
    (+) (-)
    Intelligent Key unit connector Terminal OFF ACC ON
    M52 6 Ground 0 0 Battery voltage

    OK or NG 

    OK >> Ignition power supply is OK.

    NG >> Check the following.

    • Intelligent Key unit power supply circuit.
    • 10A fuse [No. 2, located in the fuse block (J/B)]
      Fig 1: Checking Ignition Switch Position
      G04814533
scientia non olet · About Mike's Workshop Manuals