Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Body, Lock & Security System) >> Intelligent Key System >> CONSULT-II Application Items >> Data Monitor

Data Monitor

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
DATA MONITOR

Monitor item Content
PUSH SW Indicates [ON/OFF] condition of ignition knob switch.
KEY SW Indicates [ON/OFF] condition of key switch.
DR REQ SW Indicates [ON/OFF] condition of door request switch (driver side).
AS REQ SW Indicates [ON/OFF] condition of door request switch (passenger side).
BD/TR REQ SW Indicates [ON/OFF] condition of back door request switch.
IGN SW Indicates [ON/OFF] condition of ignition switch in ON position.
ACC SW Indicates [ON/OFF] condition of ignition switch in ACC position.
STOP LAMP SW Indicates [ON/OFF] condition of stop lamp switch.
P RANGE SW Indicates [ON/OFF] condition of shift lever park position.
BD OPEN SW Indicates [ON/OFF] condition of back door open switch.
DOOR LOCK SIG(1) Indicates [ON/OFF] condition of door lock signal from Intelligent Key button.
DOOR UNLOCK SIG(1) Indicates [ON/OFF] condition of door unlock signal from Intelligent Key button
DOOR SW DR(1) Indicates [OPEN/CLOSE] condition of front door switch driver side from BCM via CAN communication line.
DOOR SW AS(1) Indicates [OPEN/CLOSE] condition of front door switch passenger side from BCM via CAN communication line.
DOOR SW RR(1) Indicates [OPEN/CLOSE] condition of rear door switch RH from BCM via CAN communication line.
DOOR SW RL(1) Indicates [OPEN/CLOSE] condition of rear door switch LH from BCM via CAN communication line.
TRUNK SW(1) This is displayed even when it is not equipped.
VEHICLE SPEED(1) Indicates [km/h] condition of vehicle speed.
(1) Select "SELECTION FROM MENU".