Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Body, Lock & Security System) >> Intelligent Key System >> CONSULT-II Application Items >> Active Test

Active Test

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
ACTIVE TEST

Test item Description
DOOR LOCK/UNLOCK This test is able to check door lock/unlock operation.
  • The all door lock actuators are unlocked when "ALL UNLK" on CONSULT-II screen is touched.
  • The all door lock actuators are locked when "LOCK" on CONSULT-II screen is touched.
ANTENNA This test is able to check Intelligent Key antenna operation.
When the following conditions are met, hazard warning lamps flash.
  • Inside key antenna (front console) detects Intelligent Key, when "ROOM ANT1" on CONSULT-II screen is touched.
  • Inside key antenna (instrument panel and rear floor) detects Intelligent Key, when "ROOM ANT2" on CONSULT-II screen is touched.
  • Outside key antenna (driver side) detects Intelligent Key, when "DRIVER ANT" on CONSULT-II screen is touched.
  • Outside key antenna (passenger side) detects Intelligent Key, when "ASSIST ANT" on CONSULT-II screen is touched.
  • Outside key antenna (rear bumper) detects Intelligent Key, when "BK DOOR ANT" on CONSULT-II screen is touched.
OUTSIDE BUZZER(S) (DRIVER DOOR), (TRUNK)(1) This test is able to check Intelligent Key warning buzzer operation.
Intelligent Key warning buzzer sounds when "ON" on CONSULT-II screen is touched.
INSIDE BUZZER (CHIME) This test is able to check Intelligent Key warning chime (Instrument panel) operation.
  • Take away warning chime sounds when "TAKE OUT" on CONSULT-II screen is touched.
  • Ignition switch warning chime sounds when "KNOB" on CONSULT-II screen is touched.
  • Ignition key warning chime sounds when "KEY" on CONSULT-II screen is touched.
INDICATOR This test is able to check warning lamp operation.
  • "KEY" Warning lamp (Green) illuminates when "BLUE ON" on CONSULT-II screen is touched.
  • "KEY" Warning lamp (Red) illuminates when "RED ON" on CONSULT-II screen is touched.
  • "LOCK" Warning lamp illuminates when "KNOB ON" on CONSULT-II screen is touched.
  • "KEY" Warning lamp (Green) flashes when "BLUE IND" on CONSULT-II screen is touched.
  • "KEY" Warning lamp (RED) flashes when "BLUE IND" on CONSULT-II screen is touched.
  • "P-SHIFT" Warning lamp flashes when "KNOB ON" on CONSULT-II screen is touched.
(1) Sedan
scientia non olet · About Mike's Workshop Manuals