"KEY" Warning Lamp (RED) Check

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

CHECK WARNING LAMP OPERATION
With CONSULT-II
- Check "INDICATOR" in "ACTIVE TEST" mode with CONSULT-II.
- Select "RED ON".
"KEY" warning lamp (red) should illuminate.

Fig 1: ACTIVE TEST Mode With CONSULT-II - Screen Display

Without CONSULT-II
1. Turn ignition switch OFF.
2. Ensure Intelligent Key is outside and away from the vehicle.
3. While monitoring the combination meter warning lamps, push the ignition knob switch.
4. The "KEY" warning lamp (red) should illuminate indicating that the Intelligent Key is not nearby.
  
  Fig 2: Identifying Meter Warning Lamps
OK or NG

OK >> INSPECTION END

NG >> Check combination meter. Refer to " COMBINATION METERS " .