Air Fuel Ratio Sensor: Installation

1. Using SST, install the air fuel ratio sensor.

   SST 09224-00010 

   Torque: 44 N*m (449 kgf*cm, 33 ft.*lbf) (without SST) 

   Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf) (with SST) 

   Fig 1: Identifying Air Fuel Ratio Sensor Connector

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   HINT:

   Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

2. Connect the air fuel ratio sensor connector and the clamp.

Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)