Front Axle Hub: Disassembly

REMOVE FRONT AXLE HUB HOLE SNAP RING
1. Using snap ring pliers, remove the hole snap ring.
  NOTE: When removing the hole snap ring, do not damage the magnetic rotor surface.
  
  Fig 1: Removing Front Axle Hub Hole Snap Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT AXLE HUB SUB-ASSEMBLY
1. Fix the steering knuckle in a vise between aluminum plates.
  NOTE: Do not overtighten the vise.
2. Using SST, remove the axle hub.
  SST 09520-00031
  
  Fig 2: Removing Axle Hub Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using SST, remove the hub bearing inner race from the axle hub.
  SST 09950-40011 (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011), 09950-60010 (09951-00370)
  
  Fig 3: Removing Hub Bearing Inner Race Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT DISC BRAKE DUST COVER
1. Remove the dust cover by tapping the back side with a brass bar and hammer.
  
  Fig 4: Tapping Front Disc Brake Dust Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT AXLE HUB BEARING
1. Install the removed hub bearing inner race onto the outer side of the hub bearing.
2. Using SST and a press, remove the hub bearing from the steering knuckle.
  SST 09223-15020, 09387-00041 (09387-02010), 09950-60010 (09951-00630), 09950-70010 (09951-07100)
  
  Fig 5: Identifying Hub Bearing And SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002