Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Tundra Base, 5.7 V, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (3UR-FE) - System Testing, Removal & Installation >> Mass Air Flow Meter >> Installation

Mass Air Flow Meter: Installation

  1. INSTALL MASS AIR FLOW METER 
    1. Install the MAF meter with the 2 screws.

      Torque: 1.7 N*m (17 kgf*cm, 15 in.*lbf) 

    2. Connect the MAF connector.
      Fig 1: Locating MAF Meter With Screws
      G05150028Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals