Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Tundra Base, 5.7 V, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (3UR-FE) - System Testing, Removal & Installation >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

  1. REMOVE NO. 1 ENGINE UNDER COVER  (See REPLACEMENT )
  2. REMOVE V - BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  3. DRAIN ENGINE COOLANT  (See REPLACEMENT )
  4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the sensor.
    3. Remove the gasket from the sensor.
    Fig 1: Locating Engine Coolant Temperature Sensor
    G05150045Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals