Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Tundra Base, 5.7 V, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (3UR-FE) - System Testing, Removal & Installation >> Crankshaft Position Sensor >> Installation

Crankshaft Position Sensor: Installation

  1. INSTALL CRANKSHAFT POSITION SENSOR 
    1. Install the sensor with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

    2. Connect the sensor connector.
      Fig 1: Locating Crankshaft Position Sensor
      G05150041Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL CRANKSHAFT POSITION SENSOR PROTECTOR 
    1. Install the sensor protector with the 2 bolts.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      Fig 2: Locating Crankshaft Position Sensor Protector
      G05150040Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals