Mass Air Flow Meter: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
- Some systems need to be initialized after the cable is reconnected (see INITIALIZATION
).
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
- REMOVE V-BANK COVER
(See REMOVAL
)
- REMOVE MASS AIR FLOW METER
- Disconnect the MAF meter connector.
- Remove the 2 screws and MAF meter.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002