Camshaft Oil Control Valve: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)
1. Apply a light coat of engine oil to a new O-ring of the oil control valve.
  
  Fig 1: Locating O-Ring Of Camshaft Timing Oil Control Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE: Be careful that the O-ring is not cracked when installing the oil control valve.
3. Connect the camshaft timing oil control valve connector.
  
  Fig 2: Locating Oil Control Valve Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)
1. Apply a light coat of engine oil to a new O-ring of the oil control valve.
  
  Fig 3: Locating O-Ring Of Camshaft Timing Oil Control Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE: Be careful that the O-ring is not cracked when installing the oil control valve.
  
  Fig 4: Locating Oil Control Valve Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the oil control valve connector.
INSTALL THROTTLE BODY WITH MOTOR ASSEMBLY (see INSTALLATION )
INSTALL AIR CLEANER ASSEMBLY WITH ELEMENT (See INSTALLATION )
INSTALL NO. 2 AIR CLEANER HOSE (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
ADD ENGINE COOLANT (See REPLACEMENT )
INSPECT FOR ENGINE COOLANT LEAK (See ON-VEHICLE INSPECTION )
INSTALL V-BANK COVER (See INSTALLATION )
INSTALL FRONT COWL TOP OUTER PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY
1. Install the front wiper motor and link assembly (see INSTALLATION ).
INSTALL NO. 1 ENGINE UNDER COVER (See INSTALLATION )