Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Sequoia Limited, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2UZ-FE) >> SFI System >> DTC P0125 Insufficient Coolant Temperature for Closed Loop Fuel Control >> Typical Enabling Conditions

Typical Enabling Conditions

All 

TYPICAL ENABLING CONDITIONS CHART

Monitor will run whenever these DTCs are not present P0100 - P0103 (MAF sensor)
P0110 - P0113 (IAT sensor)
P0115 - P0118 (ECT sensor)

Case 1 

TYPICAL ENABLING CONDITIONS CHART - CASE 1

Engine coolant or intake air temperature at engine start -8.34°C (16.98°F) or more

Case 2 

TYPICAL ENABLING CONDITIONS CHART - CASE 2

Engine coolant or intake air temperature at engine start Between -19.45°C (-3.01 °F) and -8.34°C (16.98°F)

Case 3 

TYPICAL ENABLING CONDITIONS CHART - CASE 3

Engine coolant or intake air temperature at engine start Lower than -19.45°C (-3.01 °F)
scientia non olet · About Mike's Workshop Manuals