Road Test

WARNING: This page is about a different car, the 2010 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT SET SWITCH
1. Turn the cruise control switch on.
  
  Fig 1: Pressing Cruise Control Main Switch ON
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Check that the cruise main indicator light in the combination meter assembly illuminates.
3. Drive the vehicle at a desired speed (between approximately 40 km/h and 200 km/h [25 mph and 125 mph]).
4. Push the cruise control switch to -SET.
  
  Fig 2: Pressing Control Switch To -/SET
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Check that the SET indicator light in the combination meter assembly illuminates.
6. After releasing the switch, check that the vehicle cruises at the desired speed.
INSPECT "+" SWITCH
1. Turn the cruise control switch on.
  
  Fig 3: Pressing Cruise Control Main Switch ON
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Drive the vehicle at a desired speed (between approximately 40 km/h and 200 km/h [25 mph and 125 mph]).
3. Push the cruise control switch to -SET.
  
  Fig 4: Pressing Control Switch To -/SET
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Check that the vehicle speed increases while the cruise control switch is pushed to +RES, and that the vehicle cruises at the set speed when the cruise control switch is released.
  
  Fig 5: Pressing Control Switch To +/RES
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Momentarily push the cruise control switch upward to +RES and immediately release it. Check that the vehicle speed increases by about 1.6 km/h (1 mph) (tap-up function).
INSPECT "-" SWITCH
1. Turn the cruise control switch on.
  
  Fig 6: Pressing Cruise Control Main Switch ON
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Drive the vehicle at a desired speed (between approximately 40 km/h and 200 km/h [25 mph and 125 mph]).
3. Push the cruise control switch to -SET.
  
  Fig 7: Pressing Control Switch To -/SET
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Check that the vehicle speed decreases while the cruise control switch is pushed down to -SET, and that the vehicle cruises at the set speed when the cruise control switch is released.
5. Momentarily push the cruise control switch downward to -SET and immediately release it. Check that the vehicle speed decreases by about 1.6 km/h (1 mph) (tap-down function).
INSPECT CANCEL FUNCTION (CANCEL SWITCH)
1. Turn the cruise control switch on.
  
  Fig 8: Pressing Cruise Control Main Switch ON
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Drive the vehicle at a desired speed (between approximately 40 km/h and 200 km/h [25 mph and 125 mph]).
3. Push the cruise control switch to -SET.
  
  Fig 9: Pressing Control Switch To -/SET
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. When performing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.
  - Depressing the brake pedal
  - Pushing the cruise control switch off
  - Pulling the cruise control switch to CANCEL
  - Driving the vehicle while the vehicle stability control system is operating
  - for 1GR-FE:
    Moving the shift lever from D to N, or selecting 3rd, 2nd or 1st range with the shift lever in S
  - for 2TR-FE:
    Moving the shift lever from D or 3rd to N, 2nd or L
INSPECT RES (RESUME) SWITCH
1. Turn the cruise control switch on.
  
  Fig 10: Pressing Cruise Control Main Switch ON
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Drive the vehicle at a desired speed (between approximately 40 km/h and 200 km/h [25 mph and 125 mph]).
3. Push the cruise control switch to -SET.
  
  Fig 11: Pressing Control Switch To -/SET
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Cancel the cruise control system by performing one of the following.
  - Depressing the brake pedal
  - Pulling the cruise control switch to CANCEL
    
    Fig 12: Pulling Cruise Control Switch To CANCEL
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  - Driving the vehicle while the vehicle stability control system is operating
  - for 1GR-FE:
    Moving the shift lever from D to N, or selecting 3rd, 2nd or 1st range with the shift lever in S
  - for 2TR-FE:
    Moving the shift lever from D or 3rd to N, 2nd or L
5. After the cruise control switch is pushed up to +RES at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed that was set before the cancellation.
  
  Fig 13: Pressing Control Switch To +/RES
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002