Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Prius Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer >> ENGINE IMMOBILIZER SYSTEM (w/ Smart Key System) >> DTC Check/Clear

DTC Check/Clear

  1. CHECK DTC 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
      Fig 1: Connecting Intelligent Tester To DLC3
      G04474555Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the power switch ON (IG).
    3. Read the DTCs by following the directions on the tester's screen.
  2. CLEAR DTC 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the power switch ON (IG).
    3. Erase the DTCs by following the directions on the tester's screen.
scientia non olet · About Mike's Workshop Manuals