Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Matrix Base, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> COMPRESSOR AND MAGNETIC CLUTCH (for 1ZZ-FE) >> Disassembly

COMPRESSOR AND MAGNETIC CLUTCH (for 1ZZ-FE): Disassembly

  1. REMOVE MAGNETIC CLUTCH ASSEMBLY 
    1. Place the compressor and magnetic clutch in vise.
      Fig 1: Identifying Compressor, Magnetic Clutch And Bolts
      G05195384Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using vise pliers, hold the magnetic clutch hub.
    3. Remove the bolt, magnetic clutch hub and magnetic clutch washer.
      Fig 2: Removing Bolt, Magnetic Clutch Hub And Magnetic Clutch Washer
      G05236276Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Using a snap ring expander, remove the snap ring and magnetic clutch rotor.
    5. Remove the screw and disconnect the connector.
      Fig 3: Removing Snap Ring And Magnetic Clutch Rotor
      G04966110Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. Using a snap ring expander, remove the snap ring and magnetic clutch stator.
      Fig 4: Removing Snap Ring And Magnet Clutch Stator
      G05195387Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals