Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Land Cruiser >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Sensor Registration >> Confirmation Of Transmitter ID Registration

Confirmation Of Transmitter ID Registration

  1. Set the tire pressure of all wheels (including spare tire) to the specified value.
  2. Connect the intelligent tester (with CAN VIM) to DLC3.
  3. Turn ignition switch to ON position.
  4. Following the display on the intelligent tester, select the "DATA LIST" .
  5. Read the "TIREPRESS" values.
NOTE: It may take about 2 or 3 minutes to update the tire pressure data. If the values are not displayed after a few minutes, perform troubleshooting according to the inspection procedure for DTCs C2121/21 to C2125/25. DTC C2171/71 is set if the IDs have not been registered for 60 minutes or more.
scientia non olet · About Mike's Workshop Manuals