Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Highlander Base, 2.4 D, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Brake Control System) >> Electronically Controlled Brake System >> Brake Control Warning Light does not Come ON >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CAN COMMUNICATION SYSTEM 
    1. Check if a CAN communication system DTC is output (See PROBLEM SYMPTOMS TABLE ) .

      Result 

      DTC RESULT REFERENCE

      Result Proceed to
      DTC is not output A
      DTC is output B

    B: REPAIR CAN COMMUNICATION SYSTEM 

    A: Go to next step 

  2. CHECK MULTIPLEX COMMUNICATION SYSTEM 
    1. Check if a multiplex communication system DTC is output (See DTC CHECK / CLEAR ) .

      Result 

      DTC RESULT REFERENCE

      Result Proceed to
      DTC is not output A
      DTC is output B

    B: REPAIR MULTIPLEX COMMUNICATION SYSTEM 

    A: REPAIR OR REPLACE COMBINATION METER ASSEMBLY