Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> Highlander Base, 2.4 D, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (Brake Control System - Hybrid) >> Steering Angle Sensor >> Inspection

Steering Angle Sensor: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT STEERING ANGLE SENSOR 
    1. Inspect the steering angle sensor. If any of the following occurs, replace with a new steering angle sensor:
      • The surface of the steering angle sensor is cracked, dented, or chipped off.
      • The connector is scratched, cracked, or damaged.
      • The steering angle sensor has been dropped.
scientia non olet · About Mike's Workshop Manuals