Emission Control System: Canister: Installation

1. Install the canister with the 3 bolts.

   Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

   Fig 1: Identifying Canister Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector.
   Fig 2: Identifying Connector

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the EVAP hose.
   Fig 3: Identifying EVAP Hose

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the No. 2 canister outlet hose sub-assembly.
   1. Align the fuel tank vent hose connector with the pipe, then push in the fuel tank vent connector until the retainer makes a "click" sound to connect the fuel tank vent hose to the charcoal canister.
      NOTE:

      • Check that there are no scratches or foreign objects on the disconnected parts of the fuel tank vent connector and pipe before performing the work.
      • After connecting the fuel tank vent hose, check that the fuel tank vent hose is securely connected by pulling the quick connector.
        Fig 4: Connecting No. 2 Canister Outlet Hose Sub-Assembly

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Connect the fuel tank vent hose.
   1. Align the fuel tank vent hose connector with the pipe, then push in the fuel tank vent connector until the retainer makes a "click" sound to connect the fuel tank vent hose to the charcoal canister.
      NOTE:

      • Check that there are no scratches or foreign objects on the disconnected parts of the fuel tank vent connector and pipe before performing the work.
      • After connecting the fuel tank vent hose, check that the fuel tank vent hose is securely connected by pulling the quick connector.
        Fig 5: Connecting Fuel Tank Vent Hose

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)