Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2007 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio System & Visual System >> Radio Receiver >> Reassembly

Radio Receiver: Reassembly

  1. INSTALL RADIO BRACKET RH 
    1. Align the 4 bosses of the radio bracket with the hole in the radio receiver and install the radio bracket with the 4 screws.
      Fig 1: Identifying Radio Bracket Screws
      G05114077Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 2.5 N*m (25 kgf*cm, 22 in.*lbf) 

  2. INSTALL RADIO BRACKET LH 

    HINT:

    Use the same procedure as for the RH side.

scientia non olet · About Mike's Workshop Manuals